Click here to read the rest of the article from Residential Systems


Subwoofer Waterbury CT

Subwoofers intensify sound and really bring out the bass effects. Surround sound systems aren’t the same without subwoofers. Enhance your home theater experience and really make an impact change in your media room by adding custom in-wall subwoofers. Here you will learn what you need to accomplish the subwoofer effects. Listed below you will also find local home electronic stores around Waterbury that can explain more. Make sure to ask about A/V installation. You will want professional A/V installers to mount your custom surround systems up.

Audio House-Connecticut
860-794-6863
37 Mckinley Avenue
Bristol, CT
Morehouse HomeMedia
(203) 530-3692
78 Tankwood Road
Wallingford, CT
Cyclone Home Systems
860-829-0600
124 White Oak Dr Cyclone Home Systems
Berlin, CT
Approved Audio Svce
860-567-5801
49 Commons Dr Approved Audio Svce
Litchfield, CT
HomeTronics Lifestyles
860-349-7002
51 Giles Avenue, Unit 6
North Haven, CT
Ct Home Automation
(203) 676-6564
3000 Whitney AveSte. 231
Hamden, CT
Corbo Associates Inc.
(860) 210-9676
PO Box 169
Roxbury, CT
Safe and Sound Systems
(888) 299-1767
73 Defco Park Rd.Ste. 1
North Haven, CT
Opus
203-498-0407
40 Montowese Ave. Opus
North Haven, CT
HB Communications Inc.
(203) 747-7109
60 Dodge Avenue
North Haven, CT

Subwoofer

North Reading, MA -- B&W Loudspeakers has introduced the ISW-4 as its new best-in-class, in-wall subwoofer.
BW inwall sub2
The ISW-4 features dual B&W designed long-throw, eight-inch bass drivers utilizing Kevlar/paper cones. The combination allows the ISW-4 to produce substantial bass down to a very low 17 Hz (-6dB EQ at A setting on the SA-250.) Also, a braced BB-ISW-4 MDF backbox has been designed to prevent wall shake and cabinet distortions that plague other designs.

B&W also attributes ISW-4's high level of sound quality to the dedicated SA250 mono power amplifier/crossover. The SA250 is the ideal match to achieve the utmost performance from the ISW-4, with its 250 watts of power and an audiophile-grade electronic crossover built in.

The crossover is a fourth order Linkwitz-Riley with adjustable increments from 40Hz - 140Hz. Features also include a low-pass filter defeat, 0/180 degree phase switch, three-position bass extension switch, movie/music EQ switch, and an On/Auto-Standby switch. Amplifier inputs and outputs include XLR and RCA line in and link out. There is also a 3.5 mm jack for 12 V trigger on/standby, equalization, and movie/music. The cabinet is a 2U height (3.5 inches) for standard rack mounting.

The ISW-4 is finished in a semi-matt white suitable for custom painting. The grille is the same size as the CWM-8180 (cut-out dimensions 19.1 inches high x 10 inches wide.

A pre-mount kit is available for new construction, as well as the MDF back-box to optimize cabinet volume for the drivers and reduce acoustic bleed-through to other rooms. Use of the BB-ISW-4 backbox is strongly recommended.